The following article explains how to connect yangcli-pro with ODL over the NETCONF protocol.
The netconfd-pro 21.10-4 release and ODL karaf-0.8.4-Oxygen were used for the example.
The following list records the steps necessary to use yangcli-pro with OpenDaylight on Ubuntu LTS 20.04
- Start OpenDaylight
- Install ODL features
- Connect yangcli-pro
1. Start OpenDaylight
You can start OpenDaylight by running the following command:
ubuntu@ip-172-31-92-223:~/karaf-0.8.4$ ./bin/karaf
Apache Karaf starting up. Press Enter to open the shell now...
100% [========================================================================]
Karaf started in 0s. Bundle stats: 13 active, 13 total
________ ________ .__ .__ .__ __
\_____ \ ______ ____ ____ \______ \ _____ ___.__.| | |__| ____ | |___/ |_
/ | \\____ \_/ __ \ / \ | | \\__ \< | || | | |/ ___\| | \ __\
/ | \ |_> > ___/| | \| ` \/ __ \\___ || |_| / /_/ > Y \ |
\_______ / __/ \___ >___| /_______ (____ / ____||____/__\___ /|___| /__|
\/|__| \/ \/ \/ \/\/ /_____/ \/
Hit '<tab>' for a list of available commands
and '[cmd] --help' for help on a specific command.
Hit '<ctrl-d>' or type 'system:shutdown' or 'logout' to shutdown OpenDaylight.
opendaylight-user@root>2. Install ODL features
The following ODL features must be installed to support netconfd-pro connection with ODL:
- odl-netconf-connector-all
- odl-netconf-topology
- odl-netconf-clustered-topology
The following ODL features must be installed to support yangcli-pro connection with ODL:
- odl-netconf-console
In order to install features, use the following commands:
opendaylight-user@root>feature:install odl-netconf-connector-all opendaylight-user@root>feature:install odl-netconf-topology opendaylight-user@root>feature:install odl-netconf-clustered-topology opendaylight-user@root>feature:install odl-netconf-console
3. Connect yangcli-pro
In order to connect to your ODL server with yangcli-pro use the following command:
user@yw-user:~$ yangcli-pro server=localhost user=admin password=admin ncport=2830